Injection Press - "PRO SERIES"

 
Production injection press for soft plastic bait molds.

This machine has two separate melting pots and a nozzle that connects both which allows you to work with two colors, singly or simultaneously. 
Injecting laminate two color baits is possible.
For use with vinyl plastisol only. (Standard soft plastic bait material)

Made in the USA

These are built when ordered, lead time is normally one to two weeks and will include everything needed to operate when delivered. (excluding an air compressor) Just plug in & play. Payment options are available. See below for more information

Features:

• 64 fluid oz total capacity (1/2 gallon) (1 quart each pot)
• 10" mold height.
• Four built in industrial grade heating elements.
• Two programmable electronic heat controllers. One for each melting pot.
  
• Nozzle injects side to side and will fit molds with a tapered or 5/8" diameter injection opening.
• A front to back injection nozzle is also available;
• Front and back injection nozzle assembly for the PRO SERIES injection press
• Most mold can be injected with the standard side to side nozzle
• Nozzle (Blending block) is self cleaning and does not require removal.
• Two electric mixers - 47 rpm
  
• Specially designed mixer blades that keep glitter suspended in the plastic.
• Dual air regulators with 0-60 psi pressure gauges. One for each melting pot.
• Self venting air shut off valve with male quick connect fitting.
• 30 psi safety pop off valves.
• 2 Insulated 3/8" thick melting pots.
• Industrial grade aluminum and steel construction.
• High temp. o-rings and bushings.
  

The initial heat up time is 20 minutes (slightly longer when full of plastisol) and will maintain an operational temperature indefinitely after the initial heating time.

The two heat controllers are used to control and monitor the plastic temperature in each heating pot. A temperature difference of up to 30 F between the pots is obtainable.

The dual air regulators are used to adjust the air pressure in each heating pot.

The plastic can be heated directly inside the machine. Colorants and additives can also be added to the plastic in the machine.

The melting pots are cleaned by being drained completely and then wiped out with cloth wrapped on a wood dowel rod. The pots must be hot. It only takes a few minutes.

To save time, preheat the next batch of plastic in a presto pot or microwave and pour in the melting pots. Color change time will be less than 5 minutes by doing this.

Results will vary when injecting laminate two colors baits depending on the mold layout.
I can guarantee that two full streams of plastisol of different colors will flow out of the nozzle of this machine, but I can not guarantee how the plastisol will flow inside a mold. Every mold may fill out differently and those variances will have to be processed out with temperature and PSI adjustments to achieve your desired results.

To place an order, select the down payment or full payment option.

If the down payment option is selected an email will be sent to you when the machine is completed. Then select the final payment option and the machine will be shipped to you. You will receive two invoices/receipts for the down/final payment option. Shipping charges are added in the final payment option.

A 1500 watt step down transformer is required for countries with 220v electric service. 

1500 Watt Step Down Voltage Transformer.