2" CRAPPIE SLAYER - 10 cavity mold

Aluminum CNC machined, 2 piece, hand injection mold.

The bodies are 11/32 diameter and 7/8" long

This mold requires core pins which are included. (one set of ten)

To use this mold, lay the mold on its side with the screws facing up. Insert the pins into the holes, flush with the bottom. Turn the mold upright and tighten the screws and inject. The pins may fall out if the mold is lifted before injecting.

Applying a small amount of worm oil to the pins will help the plastic to flow around the pins and the pins need to be warmed. The plastic will cool and solidify before filling the cavities completely if the pins are cold.

THIS MOLD IS ALSO AVAILABLE IN A 1 1/2" SIZE