2" Twister tail bait mold - 12 cavity - Two color mold (The bodies and tails are different colors)
Aluminum CNC machined, 2 piece, 12 cavity hand injection mold for a 2" Twister Tail bait.
The baits are molded at 1 1/2" long. The body diameter is 1/4"
This mold has 2 injection ports. One for the bodies and the other for the tails.
To use, inject the body port, open the mold and trim the bodies from the runner.
Then insert the molded bodies in the tail side, close the mold, and inject the tail port with a different color.
Posted by jackie melton on 31st Aug 2016
Was looking for a 2 in mold for our bait.co
This is the ticket love the mold.Easy two color
mold love black/chart,purple/chart for crappie fishing.This mold makes it easy.can mold a bunch of baits in a hurry.Thanks Game changer.
Posted by Joey Driver on 30th Aug 2016
One of the easiest molds to shoot. Jacobs makes the best small baits molds period. Also, really fast shipping. Will be ordering more soon.
Posted by Josh on 20th May 2016
Just got this mold today. It is my 1st Jacobs mold. As soon as I opened it, I shot 10 doz grubs. They were all perfect. Not 1 bad bait. Very impressed. Easy to use and uses minimal platic. Shipping was SUPER fast as well.
Posted by Muskygary Gary Bowers on 28th Sep 2015
I just used the mold today for the first time. I heated the mold up on a hotplate--just until it got warm. Heated my plastic up to 350 and injected the bodies--they came out perfect, no flash. I injected with normal pressure and held it for a ten count. Next I injected another round of bodies, same results--perfect! Now I put the bodies in the tail side of the mold. They went in very easy! Close the mold and clamp the tail side. Next heat the tail color up to 340-350 and inject them. I use normal light pressure and held it for a ten count. The grubs came out perfect! No flash and great adhesiveness to the body. Super mold!! Some observations: the tail sprue is located approx. a half inch up the tail--be careful when removing the baits from the sprue so you don't tear the end of the tail off. 2. I used .08 glitter in the tail side and it injected threw the small hole very well. Hope you guys try this mold, this is the easy way of shooting two color baits. If enough guys try this mold; maybe Rick will make it in a 21/2 or 3 inch mold!