3" SNAGGLETOOTH - 2 cavity mold
Aluminum, CNC machined, 2 piece, injection mold.
The bodies are 3/8" diameter at the head and taper to 3/16" thickness at the tail.
The baits are molded at 3" long but the tails will streatch out when retrieved to around 4".
This mold can make baits with or without molded in jigs and hooks. There are magnets imbedded in one mold side that secure the jigs and hooks in place for injecting. A small amount of plastic overflow will occur in the jig hook slots if the mold is injected witout the jigs, but it can easily be removed by trimming.
This mold will only accept jigs made from the molds listed below with MUSTAD hooks, style 32756, size #2/0
The baits weigh approximately 3/16 oz. with the 3/32 oz. jigs and 7/32 oz. with 1/8 oz. jigs.
Posted by Kevin Deckers on 28th Feb 2015
great mold, the first ones shoot a bit difficult, but guess that's because the mold isn't hot enough in a cold garage with no heating during the winter, after 2 shots, the mold is hot enough and great to work with, the action of these baits is absolutely fenominal!!!