Loading... Please wait...

Add to Wish List

Click the button below to add the INJECTION PRESS "PRO SERIES" to your wish list.

Related Products

You Recently Viewed...

Our Newsletter


INJECTION PRESS "PRO SERIES"

  • An electronic thermometer is included but not shown
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Optional electric mixer. Two are included with the PRO SERIES machine.
Price:
$4,475.00
SKU:
LIP864R2
Quantity:


Product Description

 

Injection Press - "PRO SERIES"


Production injection press for soft plastic bait molds.

This machine has two separate melting pots and a nozzle that connects both which allows you to work with two colors, singly or simultaneously. 
Injecting laminate two color baits is possible.
For use with vinyl plastisol only. (Standard soft plastic bait material)

Made in the USA
Requires 115v household electric and a small air compressor.

A 1500 watt step down transformer is required for countries with 220v electric service. 

1500 Watt Step Down Voltage Transformer.

These are usually shipped within ten business days and will include everything needed to operate when delivered. (excluding an air compressor) Just plug in & play

Features:

  • 64 fluid oz total capacity (1/2 gallon) (1 quart each pot)
  • 4 built in industrial grade heating elements.
  • Industrial grade heat controller and electronic thermometer.
  • This machine is compatible with most aluminum soft plastic bait injection molds.
  • Nozzle will fit molds with a tapered or 5/8" diameter injection opening.
  • 8" mold height standard - 12" mold height is also available.
  • 2 Built in hand mixers. (Do not require continues rotating)
    Electric mixers are also available as an option. For more info see; Electric mixer assembly
  • Specially designed mixer blades that keeps glitter suspended in the plastic
  • Air regulator with 0-60 psi pressure gauge
  • Self venting air shut off ball valve with male quick connect fitting
  • 30 psi safety pop off valves
  • 2 Insulated 3/8" thick melting pots
  • Industrial grade aluminum and steel construction
  • High temp. o-rings

 

The initial heat up time is around 30 minutes and the machine will maintain an operational temperature indefinitely after the initial heating time.

The heat controller and electronic thermometer are used to control and monitor the plastic temperature. The plastic can be heated directly inside the machine. Colorants and additives can be added to the plastic in the machine.

Results will vary when injecting laminate two colors baits depending on the mold layout.
I can
guarantee
that two full streams of plastisol of different colors will flow out of the nozzle of this machine, but I can not guarantee how the plastisol will flow inside a mold. Every mold may fill out differently and those variances will have to be processed out with temperature and PSI adjustments to achieve your desired results.

A down/final payment option is available. The machines will be built when the down payment order is placed and shipped when the final payment is received. An email notice will be sent when the machine is ready for shipment. The down payment is non refundable if the final payment is not received. The final payment is due within 30 days after the build completion email notice and orders are subject to be cancelled if the final payment is not received within 30 days after notice,

Shipping charges are calculated at check out. The total shipping cost will be split into both payments with the down/final payment option.

 


Product Videos

"PRO SERIES" injection press for soft plastic bait molds. ()
  • "PRO SERIES" i...

Warranty Information

One year limited warranty.

Jacobs Mold & Machine makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that for a period of one year from the date of purchase that the mechanical components of the product are free of defects in materials and workmanship. Jacobs Mold & Machine also warrants to the original purchaser, for a period of thirty days from the date of purchase, that all other parts and components of the product are free from defects in materials and workmanship, This warranty does not apply to damage due directly or indirectly to misuse, abuse, negligence, accidents, normal wear and tear or the lack of maintenance. This warranty also does not apply to repairs, alterations or disassemble made outside our facility. Jacobs Mold & Machine shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of this product.

To take advantage of this warranty, the product must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election. We will return the repaired product at at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of this warranty, then you must bear the cost of returning the product.
Jacobs Mold & Machine is in no way liable for the results of using molds made by other manufacturers.

Find Similar Products by Category


Write your own product review

Product Reviews

  1. A solid piece of machinery. 5 Star Review

    Posted by on 18th Sep 2018

    This machine is all it is cracked up to be. It arrived quickly and was very well packed. The instructions are spot on and the machine is easy to use once you get a feel for it. Baits come out looking exceptional and allows for making plenty of baits in a shorter amount of time. One day's work can be reduced to a couple of hours. Very impressive. Rick was able to answer any questions I have and made the decision to purchase this machine much easier. I ended up getting the electric mixers with this machine. They make it easier when shooting baits with high amounts of glitter or salt. Just remember to thoroughly clean the machine afterwards when using salt to prevent rust. I do wish I had gone with the 12” mold height, oh well.
    Some tips: High heat, humidity, and moisture will cause rust on the steel parts (like anything) so be sure to clean and oil after each use.
    I heat my plastisol in Pyrex cups and stir glitter and salt thoroughly before pouring into the machine, and then I turn the electric mixers on immediately for an even mix and consistent baits.
    I keep the heat controller set around 7 on my machine after the initial heating. Your machine may vary.
    When making large baits, lower temps are better to insure complete baits with no dents; 315 degrees Fahrenheit is good.
    Over all, I highly recommend and would definitely buy this machine again. If I had the money and space for another one, I wouldn’t hesitate to get it. Really makes injecting baits much faster and easier while reducing plastic waste.


  2. Way Cool 5 Star Review

    Posted by on 23rd Mar 2018

    Very nice, very well designed machine and well crafted. I've only done one pour so far but this thing looks to ready for the long haul. Communication was a bit sparse, but the machine arrived within his time frame.
    Really considering another one.


  3. Quality product. 5 Star Review

    Posted by on 24th Jan 2018

    This machine is all that is advertised. It's very well built and works great. I'm having a small issue with hollow baits but i'm positive it's the single cavity molds i'm shooting.Every other bait mold has shot perfectly. Temp and pressure are the key factors spend a little time dialing the machine in is all it takes. impressed enough that i will be purchasing another one very shortly maybe 2 more. Rick has been there to answer any questions i have and has been very helpful.


  4. Exactly what I needed 5 Star Review

    Posted by on 8th Apr 2016

    Received the Pro Series machine earlier than expected and packed great. The craftsmanship is awesome, the unit is easy to use, the instructions that come with it cover everything. When it says to clean while at operational temperature, that's what you need to do. Took me a day or two to figure out why it was hard to clean. Love this machine, makes pouring a ton of baits a breeze! Laminates are so simple, lower your air pressure and go at it!


  5. Wow is all I can say 4 Star Review

    Posted by on 29th Nov 2014

    I recently purchased a pro-series injection machine from JACOBS and I am very impressed with the service and the quality. Rick was on time with his lead time, in fact he was even better and delivered earlier. I received the machine, it was professionally packed in a crate and arrived in Africa unharmed. It was easy to install and had everything you needed except the molds and plastisol. The instructions for temperatures etc. were spot on.