Loading... Please wait...

Add to Wish List

Click the button below to add the INJECTION PRESS "PRO SERIES" (New Design) to your wish list.

You Recently Viewed...

Our Newsletter


INJECTION PRESS "PRO SERIES" (New Design)

  • Image 1
  • Image 2
  • Right side heat controller and air regulator.
  • Temperature set at 340 degrees.
  • Press set to change temperature.
  • Adjust up or down to desired temperature.
  • Press set again to program new temperature setting.
  • Electric mixers.
  • Lift mixer shaft to open lid.
  • Right side lid opened.
  • Both lids opened.
  • Back side view with heat controller temperature probes installed. They side in a slot and lock into place.
Price:
$5,499.98
SKU:
LIP864R3

Sorry but this item is currently unavailable.

Please check back at a later stage.



Product Description

 

Injection Press - "PRO SERIES"


Production injection press for soft plastic bait molds.

This machine has two separate melting pots and a nozzle that connects both which allows you to work with two colors, singly or simultaneously. 
Injecting laminate two color baits is possible.
For use with vinyl plastisol only. (Standard soft plastic bait material)

Made in the USA

 

These are usually shipped within ten business days and will include everything needed to operate when delivered. (excluding an air compressor) Just plug in & play

Features:

  • 64 fluid oz total capacity (1/2 gallon) (1 quart each pot)
  • Four built in industrial grade heating elements.
  • Two programmable electronic heat controllers. One for each melting pot.
  • Compatible with most aluminum soft plastic bait injection molds.
  • Nozzle will fit molds with a tapered or 5/8" diameter injection opening.
  • 8" mold height standard.
  • Two electric mixers.
  • Specially designed mixer blades that keeps glitter suspended in the plastic.
  • Air regulator with 0-60 psi pressure gauge.
  • Self venting air shut off valve with male quick connect fitting.
  • 30 psi safety pop off valves.
  • 2 Insulated 3/8" thick melting pots.
  • Industrial grade aluminum and steel construction.
  • High temp. o-rings and bushings.

 

The initial heat up time is 20 minutes (dry, slightly longer when full of plastisol) and will maintain an operational temperature indefinitely after the initial heating time.

The two heat controllers are used to control and monitor the plastic temperature in each heating pot. A temperature difference of up to 30 F between the pots is obtainable.

The plastic can be heated directly inside the machine. Colorants and additives can be added to the plastic in the machine.

Results will vary when injecting laminate two colors baits depending on the mold layout.
I can
guarantee
that two full streams of plastisol of different colors will flow out of the nozzle of this machine, but I can not guarantee how the plastisol will flow inside a mold. Every mold may fill out differently and those variances will have to be processed out with temperature and PSI adjustments to achieve your desired results.

Shipping charges are calculated at check out.

 

A 1500 watt step down transformer is required for countries with 220v electric service. 

1500 Watt Step Down Voltage Transformer.

 

 


Product Videos

"PRO SERIES" injection press for soft plastic bait molds. (05:38)
Injection Press - "PRO SERIES" This machine has two separate melting pots and a nozzle that connects both which allows you to work with two colors, singly or simultaneously. Injecting laminate two color baits is possible. For use with vinyl plastisol only. (standard soft plastic bait material) Made in the USA jacobsbaits@aim.com Requires 115v household electric and a small air compressor. (Any air compressor that will inflate a car tire is sufficient) These units are built when ordered, (4-6 weeks lead time), and will include everything needed to operate when delivered. (excluding an air compressor) Just plug in & play Features: 64 fluid oz total capacity (1/2 gallon) (1 quart each pot) 4 built in industrial grade heating elements. Industrial grade heat controller. Universal nozzle that fits all molds with a 3/16" to 3/4" injection opening. This machine will work with all molds from the current hand injected bait mold makers Unlimited mold height (bases can be rotated and mounted to self built platform) 2 Built in hand mixers. (Does not require continues rotating) Specially designed mixer blades that keep heavy salt and glitter suspended in the plastic Air regulator with 0-60 psi pressure gauge Self venting air shut off ball valve with male quick connect fitting 30 psi safety pop off valve 2 Insulated 3/8" thick melting pots Industrial grade aluminum and steel construction High temp. o-rings Results will vary when injecting laminate two colors, depending on the mold layout. I can guarantee that two full streams of plastisol of different colors will flow out of the nozzle of this machine, but I can not guarantee how the plastisol will flow inside a mold. Every mold may fill out differently and those variances will have to be processed out with temperature and PSI adjustments to achieve your desired results.
  • "PRO SERIES" i...
    Injection Press - "PRO SERIES" This machine has two separate m...

Warranty Information

One year limited warranty.

Jacobs Mold & Machine makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that for a period of one year from the date of purchase that the mechanical components of the product are free of defects in materials and workmanship. Jacobs Mold & Machine also warrants to the original purchaser, for a period of thirty days from the date of purchase, that all other parts and components of the product are free from defects in materials and workmanship, This warranty does not apply to damage due directly or indirectly to misuse, abuse, negligence, accidents, normal wear and tear or the lack of maintenance. This warranty also does not apply to repairs, alterations or disassemble made outside our facility. Jacobs Mold & Machine shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of this product.

To take advantage of this warranty, the product must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election. We will return the repaired product at at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of this warranty, then you must bear the cost of returning the product.
Jacobs Mold & Machine is in no way liable for the results of using molds made by other manufacturers.

Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!