Loading... Please wait...

Add to Wish List

Click the button below to add the INJECTION PRESS "ECONO SERIES" to your wish list.

You Recently Viewed...

Our Newsletter


  • This picture does not show the melting pot heating element.
  • This picture does not show the melting pot heating element.
  • This picture does not show the melting pot heating element.
  • This is the melting pot heating element.

Product Description

The "Econo Series" is being discontinued and this model will not be available after our stock has been depleted. Parts and support will still be available after the discontinuation. We only have a few left in stock...

Production Injection Press for soft plastic bait molds


Made in the USA

A video is at the bottom of this page.

Requires 115v household electric and a small air compressor. (Any air compressor that will inflate a car tire is sufficient)
These are normally shipped within ten business days, and will include everything needed to operate when delivered. (excluding an air compressor) Some simple assembly is required. Instructions are included.

A step down transformer is also available for 220/240 volt electric. 1000 Watt Step Down Voltage Transformer.


  •    16 fluid oz capacity.
  •    Built in industrial grade heating elements.
  •    Industrial grade heat controller and electronic thermometer.
  •    Nozzle will fit molds with a tapered or 5/8" diameter injection opening.
  •    This machine is compatible with most aluminum soft plastic bait injection molds.   
  •    7" mold height
  •    Hand mixer (Does not require continues rotating)
  •    Specially designed mixer blade that keeps glitter suspended in the plastic.
  •    Air regulator with 0-60 psi pressure gauge
  •    Self venting air shut off ball valve with male quick connect fitting
  •    30 psi safety pop off valve
  •    3/8" thick pressurized melting pot
  •    Aluminum and steel construction
  •    High temperature o-ring seals


The initial heat up time is around 20 minutes.

The machine will maintain an operational temperature indefinitely after the initial heating time.

The included heat controller and electronic thermometer are used to control and monitor the plastic temperature.

The plastic can be heated directly inside the machine. Colorants and additives can also be added to the plastic in the machine.

Shipping charges are calculated in the shopping cart.

Product Videos

MVI 2297 (01:03)
Econo Injection Machine. Details available at http://stores.jacobsbaits.com/
  • MVI 2297
    Econo Injection Machine. Details available at http://stores.ja...

Product Videos

Warranty Information

One year limited warranty.

Jacobs Mold & Machine makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that for a period of one year from the date of purchase that the mechanical components of the product are free of defects in materials and workmanship. Jacobs Mold & Machine also warrants to the original purchaser, for a period of thirty days from the date of purchase, that all other parts and components of the product are free from defects in materials and workmanship, This warranty does not apply to damage due directly or indirectly to misuse, abuse, negligence, accidents, normal wear and tear or the lack of maintenance. This warranty also does not apply to repairs, alterations or disassemble made outside our facility. Jacobs Mold & Machine shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of this product.

To take advantage of this warranty, the product must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election. We will return the repaired product at at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of this warranty, then you must bear the cost of returning the product.
Jacobs Mold & Machine is in no way liable for the results of using molds made by other manufacturers.

Find Similar Products by Category

Write your own product review

Product Reviews

  1. econo series injection press is a big time producer. 5 Star Review

    Posted by on 2nd Apr 2018

    Simple directions and easy set up. User friendly. Shoots all my molds perfect. " I made 100 panfish jigs in an hour".
    Clean up is simple too.

  2. A great device 5 Star Review

    Posted by on 15th Jan 2017

    Exceeded my expectations and makes molding extremely easy!

  3. made my job so much faster 5 Star Review

    Posted by on 31st Oct 2014

    Thanks for making my work easy I realy love it yank