Grub body mold for 1/16 oz. collarless lead head jigs - 6 cavity
Use this mold to inject grub bodies around 1/16 oz. lead head jigs. Hook sizes #4, #2, #1
This mold will work with both painted and unpainted lead head jigs, it can also be used with or without attached tail material.
This mold is also available for 1/32 and 1/8 oz. size jigs.
(Can be used with 1/16 oz. jigs made from Do-It molds also)
Use 1/16 oz. round head jigs made from JACOBS BAITS or DO-IT lead molds.
Paint the jig heads and attach the tail material to the hook shank. (If desired)
Place the jigs in the body mold and clamp both halves together securely
(MAKE SURE THE JIGS ARE SEATED CORRECTLY BEFORE CLAMPING)
Inject the body mold with your plastic
A small amount of plastic may seep out of the tail/hook opening when injecting, but it can easily be clean before opening the body mold.
Posted by Unknown on 9th Oct 2015
jig head needs improved, should be larger so head fits better with paint on it. This is an OK jig for personal uses . However not one what I would recommend for anyone trying to make profitable sales with . To time consuming .
Posted by Billy Morgan on 1st Aug 2015